Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.     

基于查表的开环MPM预失真器

提出了一种基于查表的开环记忆多项式模型(MPM,Memory Polynomial Model)预失真器.从MPM预失真器系数估计和执行信号预失真处理两方面加以考虑.首先,利用预失真器和高功率放大器(HPA,High Power Amplifier)传输特性的互补性,由采集到的HPA输入、输出基带数据进行单次最小二乘估计得到MPM预失真器的系数,避免了以往递归结构的收敛性和计算量大等问题.然后,利用MPM预失真器的特点,建立了基于输入信号强度索引的一维向量表,通过查表实现MPM预失真器的幂次累加项,极大地减少了实现预失真器所需的计算量及硬件开销.仿真显示,采用提出的预失真器可以有效补偿HPA对信号的记忆非线性失真,有效带宽内获得了近20 dB的功率改善,也显著改善了系统误码性能.     

储氢合金的性质及发展趋势

本文介绍了储氢合金的性质，Ｎｉ－ＭＨ电池原理，以及储氢合金对Ｎｉ－ＭＨ电池所产生的影响，根据目前科学技术的发展以及市场的需求，提出了未来储氢合金及Ｎｉ－ＭＨ电池的发展趋势。     

气固两相透平叶片冲蚀特性的气动试验研究

在自行研制风洞中先后对应用较广的MCrAlY叶片涂层和2Cr12Mo-5叶片合金、钢丸表面强化试件在不同气流速度、颗粒冲角、颗粒性状、颗粒粒度的条件下进行了气动冲蚀试验。试验结果表明,无论是涂层还是合金,冲蚀率均随冲蚀颗粒的累积质量呈线性变化;由对比可知,其它条件相同的情况下,涂层在广泛的冲角范围内较合金的冲蚀率更小,表面的"烧结"特征,能减小叶片的冲蚀率;表面呈多棱的石英砂颗粒对试件的冲蚀程度强于带突圆球状的催化剂颗粒;在该试验范围内,相同材质的颗粒,粒度愈大,对试件的冲蚀率愈大;钢丸表面强化工艺兼有防冲蚀的能力。试验结果将为优化叶片选材、简化叶片维修技术、降低叶片维修成本提供有益的参考。     

2024铝合金新人工时效制度的探讨

为缩短2024铝合金的自然时效时间,本文通过对2024铝合金导电率和硬度实验研究以及对它的时效机理的分析,初步确定了2024铝合金的一种新的时效时间较短的人工时效制度.这种新时效制度为:时效温度45±5.5℃,时效时间12h.在飞机结构维修中,这种新人工时效制度对于缩短飞机维修停场时间具有重要作用.     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

航空航天智能材料与智能结构研究进展

智能材料作为新兴多功能材料,能够实现结构功能化、功能多样化。智能结构是在结构中集成智能材料作为传感器和驱动器,使结构除了具有承载、传力、连接等功能外,还具有自感知、自诊断、自驱动、自修复等能力,以更好地适应外界环境的变化,可显著提升航空航天架构的性能。目前智能材料与智能结构已成为航空航天架构减重增效研究的重点。根据国内外智能材料和结构的研究进展,综述了压电材料、铁磁材料、形状记忆材料、智能复合材料等智能材料的发展;讨论了智能结构的研究及应用前景,包括自诊断智能结构、自修复智能结构和减振降噪智能结构;最后,指出了智能材料与结构当前面临的一些挑战性问题,展望了其在航空航天领域的应用前景。     

Revisiting Perspective-Taking: Can People Maintain Imagined Perspectives?

Abstract

Three experiments were conducted to examine whether people can adopt and maintain imagined perspectives in the absence of target information. The task used entailed providing information about an imagined perspective in advance of target information to examine whether this would facilitate perspective-taking performance and reduce or eliminate alignment effects that are commonly reported in the literature. The three experiments employed different types of spatial environments: an environment learned from navigating a computer screen (Experiment 1), and an immersive environment that was either remote (Experiment 2) or immediate (Experiment 3) at the time of retrieval. Across the three experiments, results showed that information about an imagined perspective can be utilized ahead of target information. Furthermore, they suggested that alignment effects can be reduced as a result of processing information about perspective ahead of target information, but only when reasoning about specific nonimmediate spatial relations (Experiments 1 and 2). Results are discussed in connection with previous findings on spatial updating and the organizational structure of spatial memory.     

飞机结冰冰形测量方法研究进展

不同气象环境下飞机部件的结冰外形是飞机结冰研究不可缺少的内容,它对开展结冰气动分析、结冰防护设计、结冰飞行操作和结冰适航取证等研究具有重要意义。结合国内外冰形测量技术发展现状,从接触测量方法和非接触测量方法两个方面分别介绍了现有冰形测量技术的操作流程及测量原理,系统分析总结了各自存在的优缺点。在此基础上,结合飞机结冰和结冰风洞试验的特点,归纳了冰形测量技术下一步发展面临的挑战,包括全类型结冰的精确测量、结冰全貌三维测量和结冰生长过程实时测量等,同时,从基础测量手段与数值计算融合发展的角度,展望了冰形测量方法未来的发展趋势。     

干涉配合构件的应力腐蚀开裂特性

采用恒载荷拉伸实验技术，研究了镀锌３０ＧｒＭｎＳｉＡ锡螺栓干涉配合连接ＬＹ１２－ＣＺ铝合金构件在３．５％ＮａＣａｌ＋０．５％Ｈ２Ｏ２溶液中的应力腐蚀开裂特性。结果表明，随干涉量的增加，应力腐蚀敏感性有所下降，基材与紧固件的电偶效应对应力腐蚀繁感性有重大影响。